an open source synthesizer & sequencer, based on the Atmega328p.

An open source German Equitorial Mount for Astrophotography

Arduino Electronic Piano Keyboard written in ANSI C, not finished, idea is to use one input analog pin, and 8 buttons with some resistors, ideally for ATinny or some ESP

Repo containing lots of ATmega328P projects, involving peripherals, and external devices such as lcd displays. Also might include simulation files for Proteus 8.6 SP2

Simple program written in ANSI C for addressing WS2812B LED ring

Interrupts written in ANSI C

Simple program written in ANSI C for arduino, I use Timer1 with ISR

Arduino Blink LED, delay 2 sec, written in ANSI C

I2C program for addressing hardware Arduino EEPROM written in ANSI C

Цифров генератор на сигнали с тъчскрийн

C_Arduino_Generisanje_Zvuka - Arduino Assembler, Sound Generation. Connect the amplifier with the transistor to the output pin. Use timers to change frequencies and change zeros and ones.

Embedded Systems, C , Avr-C

Simple program written in ANSI C for arduino, uses PWM and Interrupt for controlling LED diode

[ECE NTUA] Assignments for the course microprocessors.

"C_Hardware_UART.c" is a project showcasing hardware UART communication on an Atmel AVR microcontroller. It enables bidirectional data transmission and reception, demonstrating the implementation of a half-duplex serial communication channel. Useful for AVR-based projects requiring robust serial communication capabilities.

Simple program written in ANSI C for arduino, uses PWM for controlling the LED diode - fade in, fade out

Simple program written in ANSI C for addressing WS2812B RGB ring, rotating desired effect

Arduino Project

Simple program written in ANSI C for arduino, uses PWM for controling LED diode