Bosch Compress 5800i AW: Power Modulation with PV Integration Not Working After Update to v3.7.1 #2284
Comments
|
Those entities should still be there. Can you provide the output of Also check the Customizations model to see if there present, perhaps without values |
|
|
|
indeed, I see powerReduction is missing. Let's see if it's in the telegram. do a |
|
nothing happens
|
|
remove the 'read' if using the webUI |
|
|
|
|
|
Hi, I already once started a discussion about silent mode / powerreduction, but then I realized, I wasn't on the latest EMS-ESP firmware, and after updating it looked fine, so I closed it. But recently I realized again, that the values for the silent mode times were not available in EMS-ESP / HomeAssisant, although configured on my Bosch Compress 6800i AW: This is can be reproduced by restarting the EMS-ESP gateway. However, the values become available again on the EMS-ESP entities when the settings are changed in the device's settings menu:
( [EDIT:] Within less than an hour the values disappeard from the entities again. |
Uh oh!
There was an error while loading. Please reload this page.
DESCRIPTION
With EMS-ESP v3.7.1, modulation options for heat pump and PV system owners have been introduced, as highlighted in the release notes. This includes features like Silent Mode and % power reduction settings. Unfortunately, after updating my system, these features do not appear to work or show up in my configuration.
I own a Bosch Compress 5800i AW heat pump and a PV system. After applying the update, none of the expected modulation settings or parameters for power reduction are visible in the EMS-ESP web interface or API.
REQUESTED INFORMATION
Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
{ "system": { "version": "3.7.1", "uptime": "000+20:24:15.506", "uptimeSec": 73455, "platform": "ESP32", "cpuType": "ESP32-D0WD-V3", "arduino": "ESP32 Arduino v2.0.17", "sdk": "v4.4.7-dirty", "freeMem": 155, "maxAlloc": 107, "freeCaps": 4172, "usedApp": 2389, "freeApp": 2283, "partition": "app1", "resetReason": "Software reset CPU / Software reset CPU", "psram": true, "psramSize": 4093, "freePsram": 4052, "model": "" }, "network": { "network": "Ethernet", "hostname": "ems-esp", "TxPowerSetting": 0, "staticIP": false, "lowBandwidth": false, "disableSleep": true, "enableMDNS": true, "enableCORS": false, "APProvisionMode": "disconnected", "APSecurity": "wpa2", "APSSID": "ems-esp" }, "ntp": { "NTPStatus": "disconnected", "enabled": false, "server": "time.google.com", "tzLabel": "Europe/Amsterdam" }, "mqtt": { "MQTTStatus": "connected", "MQTTPublishes": 16192, "MQTTQueued": 0, "MQTTPublishFails": 0, "MQTTReconnects": 0, "enabled": true, "clientID": "esp32-f022c930", "keepAlive": 60, "cleanSession": false, "entityFormat": 0, "base": "ems-esp", "discoveryPrefix": "homeassistant", "discoveryType": 0, "nestedFormat": 1, "haEnabled": true, "mqttQos": 0, "mqttRetain": false, "publishTimeHeartbeat": 60, "publishTimeBoiler": 10, "publishTimeThermostat": 10, "publishTimeSolar": 10, "publishTimeMixer": 10, "publishTimeWater": 10, "publishTimeOther": 10, "publishTimeSensor": 10, "publishSingle": false, "publish2command": false, "sendResponse": false }, "syslog": { "enabled": false }, "sensor": { "temperatureSensors": 0, "temperatureSensorReads": 0, "temperatureSensorFails": 0, "analogSensors": 0, "analogSensorReads": 0, "analogSensorFails": 0 }, "api": { "APICalls": 4, "APIFails": 1 }, "bus": { "busStatus": "connected", "busProtocol": "HT3", "busTelegramsReceived": 355738, "busReads": 65188, "busWrites": 14, "busIncompleteTelegrams": 0, "busReadsFailed": 0, "busWritesFailed": 0, "busRxLineQuality": 100, "busTxLineQuality": 100 }, "settings": { "boardProfile": "E32V2", "locale": "en", "txMode": 1, "emsBusID": 11, "showerTimer": false, "showerMinDuration": 180, "showerAlert": false, "hideLed": false, "noTokenApi": false, "readonlyMode": false, "fahrenheit": false, "dallasParasite": false, "boolFormat": 1, "boolDashboard": 1, "enumFormat": 1, "analogEnabled": true, "telnetEnabled": true, "maxWebLogBuffer": 50, "webLogBuffer": 34, "modbusEnabled": false, "forceHeatingOff": false, "developerMode": false }, "devices": [ { "type": "boiler", "name": "XCU_THH/CS*800i, Logatherm WLW*", "deviceID": "0x08", "productID": 8, "brand": "Bosch", "version": "00.00", "entities": 167, "handlersReceived": "0xBF 0x14 0xD1 0xE3 0xE4 0xE5 0xE9 0x0494 0x0495 0x048F", "handlersFetched": "0xE6 0xEA 0x048D 0x04A2 0x0485 0x0486 0x0492 0x0488 0x0484 0x048B 0x0491 0x0499 0x049C 0x049D 0x04AE 0x04AF 0x02CC 0x04AA 0x04A7 0x02D6", "handlersPending": "0x10 0x11 0xC2 0x15 0x1C 0x18 0x19 0x1A 0x35 0x16 0x33 0x34 0x26 0x2A 0x28 0x048A 0x04A5", "handlersIgnored": "0xE7 0x02E0 0x02EA 0x061E 0x023E 0x0240 0x0291 0x0292 0x0293 0x0294 0x029B 0x02A5 0x02F5 0x04A8 0x04A9 0x04AB 0x04AC 0x04CA 0x04CB 0xF7 0x17 0x04A0 0xF6 0xF9" }, { "type": "thermostat", "name": "HMI800.2/Rego 3000, UI800, Logamatic BC400", "deviceID": "0x10", "productID": 253, "brand": "", "version": "47.10", "entities": 71, "handlersReceived": "0x06 0x02BA 0x02BB 0x02BC 0x031D 0x0267", "handlersFetched": "0x02A5 0x02B9 0x02AF 0x029B 0x0471 0x02CC 0x0467 0x0291 0x0292 0x0293 0x0294 0x02F5 0x023A 0x0240 0xBB 0x023E", "handlersPending": "0xA3 0xA2 0x12 0x13 0x02A6 0x02B0 0x029C 0x0472 0x02A7 0x02B1 0x029D 0x0473 0x02A8 0x02B2 0x029E 0x0474 0x02A9 0x02BD 0x02B3 0x029F 0x0475 0x02AA 0x02BE 0x02B4 0x02A0 0x0476 0x02AB 0x02BF 0x02B5 0x02A1 0x0477 0x02AC 0x02C0 0x02B6 0x02A2 0x0478 0x02CE 0x0468 0x02D0 0x0469 0x02D2 0x046A 0x02F6 0x031B 0x031E 0x0269", "handlersIgnored": "0x0507 0x0508 0x0509 0x050A 0x059D 0xBF" } ] }TO REPRODUCE
EXPECTED BEHAVIOUR
After updating to v3.7.1, I expected the following:
• Silent Mode settings (on, auto, off) to be visible.
• Power reduction options (30%, 40%, 50%, 60%) to be available for configuration.
SCREENSHOTS
If applicable, add screenshots to help explain your issue.
ADDITIONAL CONTEXT
The modulation features appear to have been tested on Bosch CS 6800i AW heat pumps. Could this be why the Bosch Compress 5800i AW does not show the relevant parameters? If additional configuration steps are needed, they are not clear in the documentation.
emsesp_system_info.json
The text was updated successfully, but these errors were encountered: