Can anyone help? WLED on GPIO2, no bottom LEDs needed

[zav13r]

Hi community - looking for assistance with my setup as a newcomer.

I have HyperHDR running on a rooted LG TV, forwarding to the HyperHDR Home Assistant add-on. The aim is to control LED strips mounted on the right, left and top of the TV which are controlled by WLED.

Everything is working fine, except the LED layout. I may be complicating things because:

• The WLED controller has 2x strips connected to GPOI16 and GPIO2. The ones on the TV are at GPIO2.
• GPIO16 has a run of 145 LEDs which sit under the TV cabinet as floor accent lights. I do not want these included in HyperHDR
• GPIO2 has a run of 150 LEDs which are arranged as 40 (right), 70 (top) and 40 (left) of the TV screen.
• There are no LEDs running on the bottom edge
• The 'start position' is the bottom right of the TV

I have tried several combinations including gaps, input positions, and start LED numbers but I am just not getting it. The first 145 LEDs on GPIO16 are always included, and I essentially want a 'false' start position at LED number 146 in the run, which is the first LED on the bottom right of the TV that ignores completely the first strip. It may not even be possible I am guessing...

Is anyone able to offer assistance?

[zav13r]

Hi community - looking for assistance with my setup as a newcomer.

I have HyperHDR running on a rooted LG TV, forwarding to the HyperHDR Home Assistant add-on. The aim is to control LED strips mounted on the right, left and top of the TV which are controlled by WLED.

Everything is working fine, except the LED layout. I may be complicating things because:

• The WLED controller has 2x strips connected to GPOI16 and GPIO2. The ones on the TV are at GPIO2.
• GPIO16 has a run of 145 LEDs which sit under the TV cabinet as floor accent lights. I do not want these included in HyperHDR
• GPIO2 has a run of 150 LEDs which are arranged as 40 (right), 70 (top) and 40 (left) of the TV screen.
• There are no LEDs running on the bottom edge
• The 'start position' is the bottom right of the TV

I have tried several combinations including gaps, input positions, and start LED numbers but I am just not getting it. The first 145 LEDs on GPIO16 are always included, and I essentially want a 'false' start position at LED number 146 in the run, which is the first LED on the bottom right of the TV that ignores completely the first strip. It may not even be possible I am guessing...

Is anyone able to offer assistance?

Anybody? I'd be so grateful for help - even to tell me that what I am trying to do is not possible.

[awawa-dev]

Hi
I don't use WLED and as you can read on the wiki, it's not a recommended LED controller for our purposes due to the dependency on Wi-Fi. So unfortunately at least I can't help you with your issue, maybe someone else has a similar setup although this is a special case.